The action of weathering influences on the wood surface finish and color of the wood forest species
Abstract
The objective of this study was to evaluate the effect of different surface finishes on the adhesion of varnish-based coatings and the color variation on wood of Corymbia citriodora and Khaya ivorensis, before and after exposure to accelerated weathering. The treatments consisted of machining samples (T1), samples were sanded with 80 grit (T2), 120 grit (T3), 180 grit (T4), and 220 grit (T5) and then varnished. The weathering conditions were applied in an accelerated aging chamber with ultraviolet radiation, humidity and temperature control, simulating adverse environmental conditions. For the colorimetric analysis, a CIELab system spectrophotometer was used. The wood of both species presented satisfactory results for the adhesion to the polyurethane varnish before and after the weathering test, with Khaya ivorensis showing the best result (1.00). We observed that the wood of the analyzed species showed small percentage of detached varnish film. The natural coloration of the wood was not altered by the use of sandpaper with different particle sizes. The process of accelerated weathering caused significant changes in the woods of the studied species, being the wood color classified as very appreciable.
Downloads
References
AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM G154: standard practice for operating fluorescent light apparatus for UV exposure of nonmetallic materials. Philadelphia: ASTM, 2006. 11 p.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR 11003: tintas: determinação de aderência. Rio de Janeiro: ABNT, 2009. 9 p.
AVELINO, E. F. Avaliação da madeira de teca jovem (Tectona grandis L.f.vem) visando uso em movelaria. 2012. 88 f. Dissertação (Mestrado em Ciências Ambientais e Florestais) – Universidade Federal Rural do Rio de Janeiro, Seropédica, 2012.
AYADI, N.; LEJEUNE, F.; CHARRIER, F.; CHARRIER, B.; MERLIN, A. Color stability of heat-treated wood during artificial weathering. Holz als Roh: und Werkstoff, v. 61, n. 3, p. 221-226, 2003. doi: 10.1007/s00107-003-0389-2.
CADEMARTORI, P. H. G.; MATTOS, B. D.; MISSIO, A. L.; GATTO, D. A. Colour responses of two fast-growing hardwoods to two-step steam-heat treatments. Materials Research, v. 17, n. 2, p. 487-493, 2014. doi: 10.1590/S1516-14392014005000031.
CARVALHO, A. M.; GONÇALVES, M. P. M.; AMPARADO, K. F.; LATORRACA, J. V. F.; GARCIA, R. A. Correlações da altura e diâmetro com tensões de crescimento em árvores de Corymbia Citriodora e Eucalyptus Urophylla. Árvore, v. 34, n. 2, p. 323-331, 2010a. doi: 10.1590/S0100-7622010000200015.
CARVALHO, A. M.; SILVA, B. T. B.; LATORRACA, J. V. F. Avaliação da usinagem e caracterização das propriedades físicas da madeira de mogno africano (Khaya ivorensis A. Chev.). Cerne, v. 16, p. 106-114, 2010b. Suplemento.
CHANG, S.-T.; HON, D. N.-S.; FEIST, W. C. Photodegradation and photoprotection of wood surfaces. Wood and Fiber Science, v. 14, n. 2, p. 104-107, 1982.
CHEN, Y.; FAN, Y.; GAO, J.; STARK, N. M. The effect of heat treatment on the chemical and color change of black locust (Robinia pseudoacacia) wood flour. BioResources, v. 7, n. 1, p. 1157-1170, 2012.
CONTE, B.; MISSIO, A. L.; PERTUZZATTI, A.; CADEMARTORI, P. H. G.; GATTO, D. A. Propriedades físicas e colorimétricas da madeira termorretificada de Pinus elliottii var. elliottii. Scientia Forestalis, v. 42, n. 104, p. 555-563, 2014. doi: 10.12953/2177-6830/rcm.v7n1p7-15.
DIAS JÚNIOR, A. F.; SANTOS, P. V.; PACE, J. H. C.; CARVALHO, A. M.; LATORRACA, J. V. F. Caracterização da madeira de quatro espécies florestais para uso em movelaria. Ciência da Madeira, v. 4, n. 1, p. 93-107, 2013. doi: 10.12953/2177-6830.v04n01a08.
DIAS JÚNIOR, A. F.; LANA, A. Q.; SANTOS, P. V.; CARVALHO, A. M.; SOUZA, N. D.; BRITO, J. O. Propriedades físicas e acabamento superficial da madeira de eucalipto termicamente tratada. Revista de Ciências Agrárias, v. 58, n. 3, p. 270-276, 2015. doi: 10.4322/rca.2010.
GONÇALEZ, J. C.; FÉLIX, T. L. F.; GOUVEIA, F. N.; CAMARGOS, J. A. A.; RIBEIRO, P. G. Efeito da radiação ultravioleta na cor da madeira de freijó (Cordia goeldiana Huber) após receber produtos de acabamentos. Ciência Florestal, v. 20, n. 4, p. 657-664, 2010. doi: 10.5902/198050982424.
HASHEMI, S. M. B.; KHANEGHAH, A. M.; KOUBAA, M.; BARBA, F. J.; ABEDI, L.; NIAKOUSARI, M.; TAVAKOLI, J. Extraction of essential oil from Aloysia citriodora Palau leaves using continuous and pulsed ultrasound: kinetics, antioxidant activity and antimicrobial properties. Process Biochemistry, v. 65, p. 197-204, 2018. doi: 10.1016/j.procbio.2017.10.020.
HON, D. N.-S. Weathering and photochemistry of wood. In: HON, D. N.-S.; SHIRAISHI, N. (Ed.). Wood and cellulosic chemistry. 2. ed. New York: Marcel Dekker, 2001. p. 513-546.
INDÚSTRIA BRASILEIRA DE ÁRVORES. Relatório anual 2017. Brasília, DF: IBÁ, 2017. 80 p.
JANIN, G.; GONÇALEZ, J.; ANANÍAS, R.; CHARRIER, B.; SILVA, G. F.; DILEM, A. Aesthetics appreciation of wood colour and patterns by colorimetry: part 1: colorimetry theory for the Cielab system. Maderas, Ciencia y Tecnología, v. 3, n. 1-2, p. 3-13, 2001. doi: 10.4067/S0718-221x2001000100001.
LOPES, C. S. D.; NOLASCO, A. M.; TOMAZELLO FILHO, M.; DIAS, C. T. S. Avaliação da rugosidade superficial da madeira de Eucalyptus sp. submetida ao fresamento periférico. Cerne, v. 20, n. 3, p. 471-476, 2014. doi: 10.1590/0104776020142003875.
MAZET, J. F.; JANIN, G. La qualité de l’aspect de placages de chênes: mesures de couleur et critères d’appréciation des professionnels français et italiens. Ann Sci For. v. 47, n. 3, p. 255-268, 1990. doi: 10.1051/forest:19900306.
PRATES, M. B. E. Fotodegradação do bambu (Dendrocalamus giganteus Munro) após aplicação de radiação ultravioleta artificial. 2008. Tese (Doutorado em Ciência Florestal) – Universidade Nacional de Brasília, Brasília, DF, 2008.
RIBEIRO, A.; FERRAZ FILHO, A. C.; SCOLFORO, J. R. S. O cultivo do mogno africano (Khaya spp.) e o crescimento da atividade no Brasil. Floresta e Ambiente, v. 24, p. e00076814, 2017. doi: 10.1590/2179-8087.076814.
SANTOS, P. V.; SILVA, M. A.; DIAS JÚNIOR, A. F.; CARVALHO, A. M.; NASCIMENTO, A. M. Qualidade tecnológica da madeira de Corymbia citriodora (Hook.) K.D. Hill & L.A.S. Johnson submetida ao processo de termorretificação. Scientia Forestalis, v. 44, n. 110, p. 343-350, 2016. doi: 10.18671/scifor.v44n110.07.
SOUZA, M. O.; SILVA, J. C.; DELLA LUCIA, R. M.; EVANGELISTA, W. V. Avaliação da madeira de Eucalyptus Camaldulensis Dehnh e Eucalyptus Urophylla St Blake em ensaios de usinagem visando à produção moveleira. Árvore, v. 33, n. 4, p. 751-758, 2009. doi: 10.1590/S0100-67622009000400018.
VITTI, A. M. S.; BRITO, J. O. Óleo essencial de eucalipto. Documentos Florestais, n. 17, p. 1-26, 2003.
Authors retain copyright and grant the Journal the right to the first publication. Authors are encouraged to and may self-archive a created version of their article in their institutional repository, or as a book chapter, as long as acknowledgement is given to the original source of publication. As the Journal provides open access to its publications, articles may not be used for commercial purposes. The contents published are the sole and exclusive responsibility of their authors; however, the publishers can make textual adjustments, adaptation to publishing standards and adjustments of spelling and grammar, to maintain the standard patterns of the language and the journal. Failure to comply with this commitment will submit the offenders to sanctions and penalties under the Brazilian legislation (Law of Copyright Protection; nº 9,610; 19 February 1998).